water mold

The mold is made of small squares of wire that hold the shape and thickness of the paper. To help dry the paper, the mold lets the water flow through the small wire squares.

模具由小的正方形的铁丝做成，可以控制纸张的形状和厚度。为了使纸张风干，模具允许水通过铁丝流失。

To help dry the paper, the mold lets the water flow through the small wire squares.

为了使纸干得更快，这个模子会让水通过小的金属丝方块流走。

Using CAE to design the mold of micro heat exchanger and optimizing the mold gate, flow runners and the cooling water channels.

采用CAE模拟辅助进行微流道微换热器模具的设计，对模具的浇口，流道以及冷却水道的开设进行的优化。

By using AXS-11 mobel rotary viscosimeter. tile rheopexy of the suspension liquid of attapulgite clay and it's influences on the water-hased mold coating's rheopexy behaviors are investigated.

利用NXS&11型旋转粘度计测试分析了凹凸棒粘土悬浮液的触变性及触变机制，以及它对水基铸型涂料触交行为的影响。

Select water-cooled copper mold and graphite crucible as the reaction vessel, and set different welding current and duration of preparation.

氩弧熔化时分别选用水冷铜模和石墨坩埚做反应容器，设置不同的焊接电流和持续时间。

Bulk Cu_ ( 50) Zr_ ( 42) Al_ ( 8) coniform amorphous samples ( 10 mm in bottom diameter and 80 mm in length) were successfully prepared with water-cooled copper crucible and cooper mold suck cast.

采用水冷铜坩埚-铜模吸铸法成功制备了底部直径10mm、长度80mm的Cu50Zr42Al8圆锥形块体非晶试样。

This provides an in-mold seal of the water channel.

这提供了模内封闭水道的方法.

Cleans mold internal water cooling lines.

清洁模具内部冷却水线路.